Cabletron Systems SmartSwitch Router Spécifications télécharger pdf (Page 53)

100

101

Chapter 3: aging Commands

SSR Command Line Interface Reference Manual 3 - 3

aging l2 set aging-timeout

Purpose

Set the aging time for learned MAC entries.

Format

aging l2 set

<port-list>

|all-ports aging-timeout

Mode

Configure

Description

The

aging l2 set aging-timeout

command sets the aging time for learned MAC

entries. When the aging time expires for a MAC address, the SSR removes the MAC

address from the specified port(s). The aging time is specified in seconds.

Parameters

<port-list>

|all-ports

The port(s) on which you want to set the aging time. You can specify

a single port or a comma-separated list of ports. If you use the

all-

ports

keyword, the aging time is set on all ports.

The number of seconds the SSR allows a learned MAC address to

remain in the L2 lookup table (for the specified port). You can spec-

ify from 15 to 1000000 seconds. The default is 300 seconds.

Restrictions

None.

Example

Here is an example of an aging command to set the aging time to 15 seconds on all

ports.

ssr(config)# aging l2 set all-ports aging-timeout 15

Sets L2 aging to 15 seconds on all ports.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 361 362

Commentaires sur ces manuels

Pas de commentaire

Cabletron Systems SmartSwitch Router Spécifications Page 53

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Cabletron Systems SmartSwitch Router