Cabletron Systems SmartSwitch Router Spécifications télécharger pdf (Page 338)

100

101

Chapter 37: system Commands

37 - 6 SSR Command Line Interface Reference Manual

system promimage upgrade

Purpose

Upgrades the boot PROM software on the Control Module.

Format

system promimage upgrade

<IPaddr-or-hostname> <file-name>

Mode

Enable

Description

The

system

promimage

upgrade

command copies and installs a boot PROM

software image from a TFTP server onto the internal memory on the Control Module.

The boot PROM software image is loaded when you power on the SSR and in turn

loads the system software image file.

Parameters

<IPaddr-or-hostname>

The IP address or host name of the TFTP server or a

TFTP URL.

<file-name>

The file name of the boot PROM software image file.

Restrictions

None.

Example

The command in the following example downloads a boot PROM image file from

the TFTP server 10.50.89.88.

ssr# system promimage upgrade tftp://10.50.89.88/qa/prom-upgrade

Downloading image ‘qa/prom-upgrade’ from host ‘10.50.89.88’

tftp complete

checksum valid. Ready to program.

flash found at 0xbfc00000

erasing...

programming...

verifying...

programming successful.

Programming complete.

1 2 ... 333 334 335 336 337 338 339 340 341 342 343 ... 361 362

Commentaires sur ces manuels

Pas de commentaire

Cabletron Systems SmartSwitch Router Spécifications Page 338

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Cabletron Systems SmartSwitch Router