Cabletron Systems SmartSwitch Router Spécifications télécharger pdf (Page 159)

Chapter 18: ip-router Commands

SSR Command Line Interface Reference Manual 18 - 19

ip-router policy aggr-gen destination

Purpose

Creates an aggregate or generate route.

Format

ip-router policy aggr-gen destination

<number-or-string>

[source

<number-or-string>

[filter

<number-or-string>

|[network

<ipAddr-

mask>

[exact|refines|between

<low-high>

] [preference

|restrict]]]]

Mode

Configure

Parameters

destination

<number-or-string>

Is the identifier of the aggregate-destination that specifies the aggregate/summarized

route.

source

<number-or-string>

Is the identifier of the aggregate-source that contributes to an aggregate route.

filter

<number-or-string>

Specifies the filter for an aggregate/generate.

network

<IP-address>

This option specifies networks which are to be aggregated. Matching usually requires

both an address and a mask, although the mask can be implied. If no additional options

qualifying the networks to be aggregated are specified, then any destination that falls

in the range implied by this network-specification is matched, so the mask of the

destination is ignored. If a natural network is specified, the network, any subnets, and

any hosts will be matched. If you specify the

exact

refines

, or

between

parameters, the mask of the destination is also considered.

exact

This option specifies that the mask of the routes to be aggregated must match the

supplied mask exactly. This is used to match a network, but not subnets or hosts of that

network

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 361 362

Commentaires sur ces manuels

Pas de commentaire

Cabletron Systems SmartSwitch Router Spécifications Page 159

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Cabletron Systems SmartSwitch Router