Cabletron Systems SmartSwitch Router Spécifications télécharger pdf (Page 276)

100

101

Chapter 29: qos Commands

29 - 8 SSR Command Line Interface Reference Manual

qos set ip

Purpose

Set a priority for an IP flow.

Format

qos set ip

<name>

|any

|any

|any

|any

<tos>

|any

<interface-list>

|any

Mode

Configure

Description

The

qos

set

command sets the priority for an IP flow based on the following fields

in the flow:

•Flow name

• Source IP address and network mask

• Destination IP address and network mask

• Source port

• Destination port

•TOS

• Interface list

• Transport layer protocol (TCP or UDP)

You can set the priority of each field to control, low, medium, or high. The default is

low.

Parameters

<name>

Specifies the IP flow name.

Specifies the priority you are assigning

to the flow parameters you specified

from the list above. You can specify one

of the following priorities:

• control

– Assigns control priority to

the IP flow parameters you have spec-

ified. This is the highest priority.

1 2 ... 271 272 273 274 275 276 277 278 279 280 281 ... 361 362

Commentaires sur ces manuels

Pas de commentaire

Cabletron Systems SmartSwitch Router Spécifications Page 276

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Cabletron Systems SmartSwitch Router