Cabletron Systems SSIM-R8-02 Spécifications télécharger pdf (Page 91)

Enterasys Xpedition User Reference Manual 71

ATM Sample Configuration 2

The following command creates a virtual channel on port at.3.1 with VPI=0 and VCI=100:

The following command creates a virtual channel on port at.3.1 with VPI=0 and VCI=101:

Configuring an Interface on Each ATM Port

The following command assigns an IP address of 40.1.1.127/24 on port at.4.2.0.101:

The following command assigns an IP address of 30.1.1.127/24 on port at.4.2.0.100:

The following command assigns an IP address of 40.1.1.128/24 on port at.3.1.0.101:

The following command assigns an IP address of 30.1.1.128/24 on port at.3.1.0.100:

Defining an ATM Service Profile

The following commands define a service profile called ‘ubrservice’ with PCR of 20 Mbits:

The following commands define a service profile called ‘cbrservice’ with PCR of 100

Mbits:

ssr2(config)# atm create vcl port at.3.1.0.100

ssr2(config)# atm create vcl port at.3.1.0.101

ssr1(config)# interface create ip ubrservice address-netmask 40.1.1.127/24 peer-address 40.1.1.128 port

at.4.2.0.101 up

ssr1(config)# interface create ip cbrservice address-netmask 30.1.1.127/24 peer-address 30.1.1.128 port

at.4.2.0.100 up

ssr2(config)# interface create ip ubrservice address-netmask 40.1.1.128/24 peer-address 40.1.1.127 port

at.3.1.0.101 up

ssr2(config)# interface create ip cbrservice address-netmask 30.1.1.128/24 peer-address 30.1.1.127 port

at.3.1.0.100 up

ssr1(config)# atm define service ubrservice srv-cat ubr pcr-kbits 20000

ssr2(config)# atm define service ubrservice srv-cat ubr pcr-kbits 20000

ssr1(config)# atm define service cbrservice srv-cat cbr pcr-kbits 100000

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 393 394

Pas de commentaire

Cabletron Systems SSIM-R8-02 Spécifications Page 91