Cabletron Systems SSIM-R8-02 Spécifications télécharger pdf (Page 211)

Enterasys Xpedition User Reference Manual 191

Configuring Simple Routing Policies

Redistributing RIP into RIP

The XP routing process requires RIP redistribution into RIP if a protocol is redistributed

into RIP.

To redistribute RIP into RIP, enter the following command in Configure mode:

Redistributing RIP into OSPF

RIP routes may be redistributed to OSPF.

To redistribute RIP into OSPF, enter the following command in Configure mode:

Redistributing OSPF to RIP

For the purposes of route redistribution and import-export policies, OSPF intra- and inter-

area routes are referred to as ospf routes, and external routes redistributed into OSPF are

referred to as ospf-ase routes. Examples of ospf-ase routes include static routes, rip

routes, direct routes, /jointfilesconvert/276250/bgp routes, or aggregate routes, which are redistributed into an

OSPF domain.

OSPF routes may be redistributed into RIP. To redistribute OSPF into RIP, enter the

following command in Configure mode:

Redistributing Aggregate Routes

The aggregate parameter causes an aggregate route with the specified IP address and

subnet mask to be redistributed.

Note: The aggregate route must first be created using the aggr-gen command. This

command creates a specified aggregate route for routes that match the aggregate.

To redistribute RIP into RIP.

ip-router policy redistribute from-proto rip to-proto rip

To redistribute RIP into OSPF.

ip-router policy redistribute from-proto rip to-proto ospf

To redistribute ospf-ase

routes into rip.

ip-router policy redistribute from-proto ospf-ase to-proto rip

To redistribute ospf routes

into rip.

ip-router policy redistribute from-proto ospf to-proto rip

1 2 ... 206 207 208 209 210 211 212 213 214 215 216 ... 393 394

Pas de commentaire

Cabletron Systems SSIM-R8-02 Spécifications Page 211