Cabletron Systems Access Server 316 Guide d'installation télécharger pdf (Page 44)

Telnet Resource Problems

3-2

Telnet Resource Connection Problems

Introduction

If you experience problems connecting to a Telnet resource, verify the following:

• Internet address

• Internet host name

• Domain name system parameters

• Communication to remote Internet host

• Network access server memory usage

Verify Internet Address

If you are unable to connect to a Telnet resource using an Internet address, enter the

following command:

Local> SHOW INTERNET

State Enabled

Internet Address: 0.0.0.0 (Learning)

Subnet Mask: 0.0.0.0

DHCP: Enabled

TCP Keepalive Timer:120

TCP Keepalive Retry: 8

For more information on specifying the TCP/IP network characteristics for your access

server, refer to the Network Access Software Management Guide.

Step Action

1 Verify that the Internet address and subnet mask are correct.

2 If you are not using the default subnetwork mask, ensure you set the subnet mask

before you set the Internet address.

3 If your Internet address is set to 0.0.0.0, then define your Internet address using

the following command. Substitute your Internet address for 195.1.1.60:

Local> CHANGE INTERNET ADDRESS 195.1.1.60

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 301 302

Pas de commentaire

Cabletron Systems Access Server 316 Guide d'installation Page 44