Cabletron Systems Access Server 316 Guide d'installation Page 250

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 302
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 249
Messages 600 699
23-2
Local -601- Internal memory error in port parameters
Access server defaults in effect
Explanation: Parameters in the access server ports permanent database are corrupt and
factory-set defaults were used during port login.
Step Action
1 Use the CHANGE PORT command to reset the port characteristics to values of your
choice.
2 If the error message appears again, reset the port characteristics using the software
reset switch on the access server.
a. Remove power from the access server.
b. Press and hold the reset switch while you turn on the power to the access server.
c. Continue to hold the reset switch until the system o.k. LED starts to flash.
d. Use the CHANGE PORT command to reset the port characteristics to values of
your choice.
3 If this action fails to correct the problem, the access server memory that stores the port
characteristics is faulty. Refer to Chapter 29 for service information.
Vue de la page 249
1 2 ... 245 246 247 248 249 250 251 252 253 254 255 ... 301 302

Commentaires sur ces manuels

Pas de commentaire