Cabletron Systems RoamAbout Guide d'installation télécharger pdf (Page 62)

Connecting a Device to the Console Port

3-26 Installing the Access Point

d) In a Connect Using or similar field, select the port that is connected to

the Access Point, such as COM1.

e) In the Port Settings window, enter:

— Bits per second: 9600

— Data bits: 8

— Parity: None

— Stop Bits: 1

— Flow Control: Hardware

To connect to the console port at a later date, open Hyperterminal and

select File

→Open to open the Access Point Console Port connection.

5) Press <Enter> a few times until the RoamAbout Access Point Installation

Menu is displayed. The installation menu allows you to display and modify

various Access Point and wireless networking parameters.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 68

Pas de commentaire

Cabletron Systems RoamAbout Guide d'installation Page 62