Cabletron Systems RoamAbout Guide d'installation télécharger pdf (Page 34)

MOD-TAP Connector Wiring

2-16 Cabling and Wiring

6 Secure each Ethernet cable wire in its correct MOD-TAP connector slot:

• Do not remove insulation from any wire.

• With each wire firmly in place in its correct slot, reinstall the

MOD-TAP wire insertion tool/cover.

• Secure all wires by pushing down firmly on the MOD-TAP wire

insertion tool/cover.

7 Install the remote power feature or the rack mount kit, if used.

Refer to Remote Power Adapter Installation on page 2-3 or the Rack

Mount Kit Installation on page 2-5.

8 Use a CAT 5-compatible cable tester to verify continuity, correct pinouts,

and correct pairings.

9 Proceed to Chapter 3, Installing the Access Point.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 67 68

Pas de commentaire

Cabletron Systems RoamAbout Guide d'installation Page 34