Cabletron Systems CSX400-DC Guide de l'utilisateur télécharger pdf (Page 154)

General Configuration Using Local Management

140 CSX400 and CSX400-DC User’s Guide

2. ENTER the IP address of the Default Gateway using DDN format.

For example: 134.141.79.121

3. Press ENTER. If the Default Gateway address entered was a valid format, the cursor returns to

the beginning of the Default Gateway field. If the entry was not valid, the Event Message field

displays “INVALID DEFAULT GATEWAY OR FORMAT ENTERED”. Local Management

does not alter the current value and refreshes the Default Gateway field with the previous value.

4. Use the arrow keys to highlight the SAVE command field.

5. Press ENTER. The Event Message field at the top of the screen displays “SAVED OK”.

Setting the Default Interface

To set the default interface, perform the following steps:

1. Use the arrow keys to highlight the Default Interface field.

2. ENTER the interface number for the Default Gateway in this field.

3. Press ENTER. If the interface entered was a valid format, the cursor returns to the beginning of

the Subnet Mask field. If the entry was not valid, the Event Message field displays

“PERMISSIBLE RANGE: 1...1”. Local Management does not alter the current value and

refreshes the Default Interface field with the previous value.

4. Use the arrow keys to highlight the SAVE command field.

5. Press ENTER. The Event Message field at the top of the screen displays “SAVED OK”.

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 274 275

Pas de commentaire

Cabletron Systems CSX400-DC Guide de l'utilisateur Page 154