Cabletron Systems MR-9T Guide de l'utilisateur télécharger pdf (Page 53)

SIMM Upgrade

Optional Installations and Mode Switch Bank Settings B-3

• Switch 8 – Reset Password/Community Strings. Changing the position of this switch clears

only the user-entered passwords stored in NVRAM, and restores the default passwords. Once

the SmartSwitch resets, the passwords can either be reentered or the default passwords (Public

and ENTER) may be used.

B.3 SIMM UPGRADE

Memory upgrade is available for the 6E233-49 SmartSwitch module to expand the DRAM to 32

MB. This section explains how to locate and add/replace a Single In-line Memory Module

(SIMM). For information on the available SIMM upgrades, contact Cabletron Systems. For details

on getting help, refer to Section 1.2.

B.3.1 Locating SIMMs

Figure B-2 shows the location of the DRAM SIMM connector.

Figure B-2 SIMM Slot Locations

NOTE

Do not change the position of switch 8 unless it is necessary to reset the module

super-user configured passwords to their factory default settings.

DRAM SIMM

1 2 ... 48 49 50 51 52 53 54 55 56 57 58

Pas de commentaire

Cabletron Systems MR-9T Guide de l'utilisateur Page 53