Cabletron Systems T2015 Guide d'installation télécharger pdf (Page 168)

100

101

158 Installation Guide for Clients

Accton Technology EtherCoax - 16N

This driver is for OS/2 only.

Required entry:

• drivername = ethne$ or ethenen$

The following table summarizes the possible entries and values in the

[ethne] section of the LAN Manager PROTOCOL.INI file:

Entry Units Range Default

drivername — — ethne$ or

ethenen$

irq integer 2–5 3

iobase hex. 200H–3E0H 300H

receivebufsize bytes — 1024

Entries in the [ethne] section of the LAN Manager PROTOCOL.INI file

have the following meanings:

drivername

Identifies the driver name of the network device driver. The

drivername consists of the base portion of the filename, plus a digit

when more than one adapter is installed. The drivername is ethne$

for the first adapter, ethne2$ for the second, and so on.

irq

Indicates the interrupt level of the network adapter. The interrupt

level can range from 2 to 5 inclusive.

iobase

Indicates the base I/O address for the network adapter. If this entry

does not match the adapter’s I/O address jumper settings, the driver

reports an error. Values range from 200H to 3E0H in increments of

10H. If multiple adapters are installed, the difference between values

must be at least 20H.

receivebufsize

Configures the size, in bytes, of the receive buffers in the receive

buffer pool.

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 418 419

Commentaires sur ces manuels

Pas de commentaire

Cabletron Systems T2015 Guide d'installation Page 168

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Cabletron Systems T2015