Cabletron Systems SmartSTACK 10 ELS10-26 Spécifications télécharger pdf (Page 52)

4-2

VLAN MIB Objects

4.2.2 Operating Mode (VlanOperatingMode)

This object selects the mode of operation (802.1D = 1 or 802.1Q = 2). The switch

can operate as an 802.1d switch, or as an 802.1d switch with IEEE VLAN

capability (802.1Q). A read of this object will return the current operating mode.

DEFVAL { ieee8021d }

els10-27VlanOperatingMode OBJECT-TYPE

SYNTAX INTEGER { ieee8021d(1), ieee8021Q(2) }

ACCESS read-write

STATUS mandatory

::= { els10-27VlanBridgeConfig 2 }

The MIB OBJECT IDENTIFIER for accessing the VlanOperatingMode is:

OID 1.3.6.1.4.1.97.9.20.2

4.2.3 Reset (VlanReset)

This MIB object resets a specified bridge. This MIB is not supported in ELS10-

27TX Version 1.01.00.

The MIB OBJECT IDENTIFIER for accessing the VlanReset is:

OID 1.3.6.1.4.1.97.9.20.3

NOTE

Changing the value will not change the operation of the switch

until the unit is rebooted.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 97 98

Pas de commentaire

Cabletron Systems SmartSTACK 10 ELS10-26 Spécifications Page 52