Cabletron Systems Cabletron SmartSwitch Router 250 Guide d'installation télécharger pdf (Page 8)

♦ Instructions to Install the SmartSwitch™ Router 250

Hardware:

1. Ensure that the Power Switch on the router is OFF. Connect the

router to the AC power source using the power cable.

2. Connect the router to the computer workstation’s Ethernet card

using the crossover cable labeled "Ethernet 10Base-T,

Crossover" (RJ-45 connector). If you are connecting to a hub,

use a standard 10Base-T straight-through cable (not provided).

3. Connect the router to the ADSL line using the cable labeled

"ADSL or ISDN" (connect the RJ-45 connector to the router’s

ADSL R-DMT port and the other end of the cable to the

Telephone Jack).

4. Switch the router Power Switch ON

HARDWARE INSTALLATION

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 33 34

Pas de commentaire

Cabletron Systems Cabletron SmartSwitch Router 250 Guide d'installation Page 8