Cabletron Systems ELS10-26 Guide de l'utilisateur télécharger pdf (Page 28)

1-18

Introduction

As illustrated in the previous diagram, virtual workgroups allow

you to associate multiple ports and deﬁne a workgroup. In reality,

you are assigning workgroup IDs to SmartSTACK 10 ELS10-26

ports.

1.6 LOCAL CONSOLE MANAGER

The Local Console Manager (LCM) is a command-line interface

built into the SmartSTACK 10 ELS10-26. The LCM t enables you to

monitor, manage, and conﬁgure the SmartSTACK 10 ELS10-26

through the out-of-band RS232C connection attached to any non-

intelligent terminal or workstation running terminal emulation.

You can also use a Cabletron Systems Network Management

System, or a standard SNMP-based Network Management System,

to manage the SmartSTACK 10 ELS10-26. For a list of available

SmartSTACK 10 ELS10-26 network management tools, see Section

4.1, SmartSTACK 10 ELS10-26 Management Tools.

The following sections describe LCM command syntax and the

basic LCM commands for logging in, logging out, and getting

help.

• LCM commands used for conﬁguring the SmartSTACK 10

ELS10-26 are described in Chapter 3, Configuring Your

SmartSTACK 10 ELS10-26.

• LCM commands used for monitoring and managing the

SmartSTACK 10 ELS10-26 are described in Chapter 4,

Monitoring and Managing Your SmartSTACK 10 ELS10-26.

Note: The Getting Started with the SmartSTACK 10 ELS10-26 guide

lists the available LCM commands, including each command’s

options.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 115 116

Pas de commentaire

Cabletron Systems ELS10-26 Guide de l'utilisateur Page 28